Concentric glucose/O2 biofuel cell

A concentric glucose/O₂ biofuel cell has been developed. The device is constituted of two carbon tubular electrodes, one in the other, and combines glucose electrooxidation at the anode and oxygen electroreduction at the cathode. The anodic catalyst is glucose oxidase co-immobilized with the mediator 8-hydroxyquinoline-5-sulfonic acid hydrate, and the cathodic catalyst is bilirubin oxidase co-immobilized with the mediator 2,2′-azinobis (3-ethylbenzothiazoline-6-sulfonate) diammonium salt. Both enzymes and mediators are entrapped at the surface of the tubular electrodes by an electrogenerated polypyrrole polymer. The originality of the concentric configuration is to compartmentalize the anode and cathode electrodes and to supply dissolved oxygen separate from the electrolyte in order to avoid secondary reactions. The dissolved oxygen circulates through the inside of the cathode tube and diffuses from the inner to the external surface of the tube to react directly with the immobilized bilirubin oxidase. The assembled biofuel cell is studied at 37 °C in phosphate buffer pH 7.4. We show the influence of the thickness of the polypyrrole polymer on the electrochemical activity of the biocathodes. We also demonstrate the effect of the chemical reticulation of the enzymes by glutaraldehyde within the polymer on the performances of the bioelectrodes. The maximum power density delivered by the assembled glucose/O₂ biofuel cell reaches 42 μW cm⁻², evaluated from the geometric area of the electrodes, at a cell voltage of 0.30 V with 10 mM glucose. The results demonstrate that the concentric design of the BFC based on compartmented electrodes is a promising architecture for further development of micro electronic devices.     

Application of full factorial design for the preconcentration of chromium by solid phase extraction with Amberlyst 36 resin

The preconcentration of chromium(III) by solid phase extraction and its determination from aqueous solutions by flame atomic absorption spectrometry (FAAS) is investigated by applying an experimental design. The optimization of the preconcentration variables such as pH of the sample solution, flow rate of the sample solution and concentration of elution solution was carried out using 2³ full factorial design. The most important parameter affecting the preconcentration of chromium is the concentration of eluent. In the established experimental conditions, chromium can be determined with a relative standard deviation of 2.0% (N = 7) for a chromium concentration of 100 μg L⁻¹. The detection limit for chromium was 1 μg L⁻¹ (N = 20). The adsorption capacity of Amberlyst 36 is found to be 90.9 mg g⁻¹ for chromium. Effect of other ions on the procedure was also evaluated. The method was validated by the analysis of certified reference materials (tea leaves GBW 07605 and fish tissue IAEA-407). The method was applied to the determination of chromium in waste water, dam water, carrot, parsley and lettuce. Correspondence: Ali Rehber Türker, Department of Chemistry, Faculty of Science and Arts, Gazi University, TR-06500 Ankara, Turkey     

Design and economics of industrial production of fructooligosaccharides

A process for industrial production of fructooligosaccharides (FOS’s) based on the conversion of sucrose by immobilized fructosyltransferase (FTase) from the cells of Aureobasidium pullulans CCY 27-1-94 was developed. Particular process operations and conditions were designed employing results of laboratory and semi-pilot scale experiments. The process flowsheet comprised three sections: FTase production, which included fermentation, isolation and purification of the enzyme, FTase immobilization and FOS’s production where a product with a high content of FOS’s was prepared by the removal of glucose, fructose and unreacted sucrose from the reaction mixture using simulated moving-bed chromatography. Two alternative process flowsheets were proposed for the annual production of 10 000 t of FOS’s: one for a powdery product and the second one for syrup. The economic analysis provided the costs for the production of immobilized FTase and FOS’s using two different price estimates for sucrose.     

Reducing power losses caused by ionic shortcut currents in reverse electrodialysis stacks by a validated model

Both in electrodialysis and in reverse electrodialysis ionic shortcut currents through feed and drain channels cause a considerable loss in efficiency. Model calculations based on an equivalent electric system of a reverse electrodialysis stack reveal that the effect of these salt bridges could be reduced via a proper stack design. The critical parameters which are to be optimized are ρ/r and R/r, where ρ is the lateral resistance along the spacers, R is the resistance of the feed and drain channels between two adjacent cells, and r is the internal resistance of a cell. Because these two parameters are dimensionless, different stacks can be easily compared. The model is validated with two experimental stacks differing in membrane type and spacer thickness, one with large ionic shortcut currents and one where this effect is less. The loss in efficiency decreased from 25 to 5% for a well-designed stack. The loss of efficiency in reverse electrodialysis and in electrodialysis can be reduced with the aid of the design parameters presented in this paper.     

Bcl-2蛋白抑制剂结合腔的性质分析

采用多重拷贝同时搜寻(MCSS)等方法对Bcl-2蛋白抑制剂结合腔进行分析. 结果显示, 结合腔可分成P1, L1, P2, P3和P4等5个区域, 其底部呈疏水性, 而P3部位不适合芳香性大基团的结合. 结合腔侧面和边缘处分布有可与配体形成除疏水以外作用的多个重要残基. MCSS计算得到的各种性质官能团在结合腔内的能量优势位置和取向能与已知结合模式的高活性抑制剂的重要基团位置吻合得较好.     

Lamination Design Optimization for Continuous Fiber Reinforced Composites of Variable Thicknesses北大核心CSCD

由于具备高的比强度、比刚度,利用连续纤维增强复合材料代替传统金属材料以实现结构轻量化正受到设计者们的广泛关注。然而,结构的复杂性给复合材料的铺层设计与优化带来了很大的挑战。针对航空用复合材料铺层设计约束多的问题,通过逐步构建设计变量准确表达结构的铺层信息。基于经典遗传算法框架,结合各设计变量特点,定义了铺层优化算法中的遗传算子,通过引入“修复”策略保证了每一代解都能满足设计约束,分布在可行域区间内。最后利用精英保留策略提高了算法的局部寻优能力,可以降低复杂复合材料结构铺层设计的计算成本。通过解决经典benchmark问题并与已有优化结果的比较,验证了前述铺层优化算法的全局、局部寻优能力,为工程实际中的复合材料铺层设计优化提供了理论支撑。     

Trace determination of safranin O dye using ultrasound assisted dispersive solid-phase micro extraction: Artificial neural network-genetic algorithm and response surface methodology

In this study, ultrasound assisted dispersive solid-phase micro extraction combined with spectrophotometry (USA-DSPME-UV) method based on activated carbon modified with Fe₂O₃ nanoparticles (Fe₂O₃-NPs-AC) was developed for pre-concentration and determination of safranin O (SO). It is known that the efficiency of USA-DSPME-UV method may be affected by pH, amount of adsorbent, ultrasound time and eluent volume and the extent and magnitude of their contribution on response (in term of main and interaction part) was studied by using central composite design (CCD) and artificial neural network-genetic algorithms (ANN-GA). Accordingly by adjustment of experimental conditions suggested by ANN-GA at pH 6.5, 1.1 mg of adsorbent, 10 min ultrasound and 150 μL of eluent volume led to achievement of best operation performance like low LOD (6.3 ng mL⁻¹) and LOQ (17.5 ng mL⁻¹) in the range of 25–3500 ng mL⁻¹. In following stage, the SO content in real water and wastewater samples with recoveries between 93.27–99.41% with RSD lower than 3% was successfully determined.     

Ultrasonic-assisted magnetic solid phase extraction of morphine in urine samples by new imprinted polymer-supported on MWCNT-Fe3O4-NPs: Central composite design optimization

Multiwalled carbon nanotubes (MWCNTs) were magnetized with Fe₃O₄ nanoparticles (MWCNTs-Fe₃O₄-NPs) and subsequently coated by vinyl end groups (Vinyltrimethoxysilane). MWCNT-Fe₃O₄-NPs were used as support for a new morphine (MO) molecularly imprinted polymer (MWCNT-Fe₃O₄-NPs@MO-MIP) by surface imprinting polymerization method. The MWCNT-Fe₃O₄-NPs@MO-MIP was characterized by FTIR, VSM and SEM techniques and successfully used for determination of MO. Ultrasonic-assisted magnetic solid phase extraction followed by UV–vis spectrophotometer (UAMSPE-UV–vis) was investigated for MWCNT-Fe₃O₄-NPs@MO-MIP and compared with non-imprinted polymer (NIP) using batch method. Central composite design under response surface methodology was used for the evaluation of the effect of variables, individually, as well as their possible interaction effects on the adsorption process. The variables such as sonication time, MWCNT-Fe₃O₄-NPs@MO-MIP mass, initial concentration of MO and pH were investigated in this study. At optimum experimental conditions, UAMSPE-UV–vis method was exhibited a linear range of 0.8–8.7 mg L⁻¹ of the MO concentration with a detection limit of 0.18 mg L⁻¹. The relative standard deviation for the analyte was found to be lower than 2.32%. The MWCNT-Fe₃O₄-NPs@MO-MIP adsorption capacity was found to be 37.01 mg g⁻¹. The enrichment and preconcentration factors were found to be 107.01 and 98.21, respectively. The developed method was finally applied successfully to the determination of MO in urine and wastewater samples with the recoveries ranged from 96.40 to 105.6%.     

HIV-1逆转录酶的分子对接及运动功能相关性分析

目的研究逆转录酶的运动性和生理功能的关系,以及N-乙酰基-β-芳基-1,2-二脱氢乙胺类衍生化合物与其的分子识别,方法采用高斯网络模型和各向异性网络模型研究了p66和p66-DNA的运动模式差异,并用分子对接方法研究化合物与逆转录酶的识别.结果 DNA的结合对p66各区域的运动方向影响不大,但其运动的幅度大大降低.分子对接结果发现Y115和M184的疏水结构在识别的过程中起到重要作用.结论基于各个区域的运动方向分析,推测手指区和RNase H区的开合运动可能是逆转录酶发挥逆转录功能的重要原因.并且,N-乙酰基-β-芳基-1,2-二脱氢乙胺类衍生化合物的N-甲基取代和反式的双键结构更有利于与逆转录酶的识别     

调度自动化机房网络配线管理软件设计与实现

针对公司调度自动化机房网络配线无图纸管理和标签标识不规范的情况,自主研发了一套机房网络配线管理软件。首先,分析了配线可视化管理软件应对网络配线绘图和标签信息自动生成的功能需求,并运用MVC模式理论进行软件架构设计;其次,重点阐述了基于QT图形库的关键功能实现,包括核心图元类的构建、元件库组件可配置生成、图形序列化反序列操作、拓扑查找、设备图元属性管理及标签信息自动生成功能等;最后,通过举例说明该软件在实际机房管理中的使用方法和应用成效。应用结果表明,通过绘制整个机房的网络连接图并录入相关设备属性信息,有助于提高机房网络故障的诊断效率和降低机房系统的运维风险。